INSTRUCTIONS

Tryk på produktnavnet for at vælge.


COBRA

Adjust the seat height
The seat height is released by pulling lever upwards and locked in the right position by letting go of the lever. The chair has the correct height when three conditions are fulfilled:

  • The front edge of the seat only just touches the backside of your thighs.
  • Your feet are resting comfortably on the floor.
  • The lower legs are in vertical position.

EGO Classic

1. Seat height
The seat height is adjusted by pulling the front lever on your right – and locked in the right position by letting go of the lever.
The chair has the correct height when three conditions are fulfilled:

  • The front edge of the seat only just touches the backside of your thighs.
  • Your feet are resting comfortably on the floor.
  • The lower legs are in vertical position.

2. Seat depth
Locate the handle under the back right portion of the seat. While pressing inward, rotate the handle forward to decrease the seat depth. Rotate the handle to the back to increase the seat depth.
The optimum position is to have 4 fingers of space between the back of your knees and the front edge of the seat.

3. Height of the backrest
Press the large button located on the lower right side of the chair back. Then use both hands to raise or lower the back to the height that provides the most support and comfort.

4. Tilt of the backrest
Slide the EGO name plate located at the top of the back support arm to increase or decrease the angle of the backrest.

5. Armrests
Adjust the height of the armrests by pressing the armrest button to find a suitable height. To adjust the width of the armrests remove the seat cushion: place a hands on the rear edge of the cushion (at the front side of the back support) and pull it off the mechanism. Use a5 mm Allen key to loosen the armrests brackets so they can be adjusted.